陕西快乐十分app

欢迎来到济南锦绣山水景观公司官方网站
热销产品关键词: 济南假山制作 济南上水石假山 济南庭院景观
产品 新闻
  • 济南上水石假山
  • 济南真石假山
  • 济南庭院景观
陕西快乐十分app
行业新闻
当前位置:陕西快乐十分app > 陕西快乐十分app > 行业新闻 > 水泥塑石假山的制作工艺!

水泥塑石假山的制作工艺!

来源:http://www.mbqmd.com/content-21-227-1.html  更新时间:2019-05-28
  水泥塑石假山是指由混凝土、玻璃纤维增强塑料、有机树脂等现代材料和石灰、砖、水泥等非石材等人工假山材料制成。塑山塑石可以节省石材的开采和运输过程,形状不受石材的限制,体积可大可小。
  Cement-plastics-stone rockery is made of modern materials such as concrete, glass fiber reinforced plastics, organic resin and artificial rockery materials such as lime, brick, cement, etc. Plastic hill stone can save the process of mining and transportation of stone. Its shape is not limited by stone, and its volume can be large or small.
  水泥塑石假山的制作工艺:
  The production technology of cement-plastics rockery rockery:
  第一步:龙骨主楼,材料应该基于假山的大小规模的需求,一般角钢,槽钢等,如果有必要,构建主龙骨的过程应该建立同时脚手架,流程实现整体轴承和滚动轴承的能力,进监狱;
  The first step: keel main building, materials should be based on the large-scale needs of rockery, general angle steel, channel steel, etc. If necessary, the process of building the main keel should establish simultaneous scaffolding, process to achieve the ability of integral bearings and rolling bearings, into prison;
  第二步:建造二次龙骨,这次用6.5#钢丝(钢)将假山的基本形式焊接出来,在制作过程中要使基本关系上下起伏;
  The second step is to build a secondary keel, this time using 6.5 # steel wire (steel) to weld out the basic form of the rockery, in the process of making the basic relationship ups and downs;
  第三步:用角钢加固副龙骨与主龙骨之间的连接,进一步加固主结构;
  The third step is to reinforce the connection between the auxiliary keel and the main keel with angle steel to further strengthen the main structure.
  第四步:使用wire加密形状,并将其细分为一个大约15cm见方的网格形状。
  Step 4: Use wire to encrypt the shape and subdivide it into a grid shape about 15 cm square.
  第五步:龙骨要做好防锈处理;
  Fifth step: keel to do a good job of anti-rust treatment;
济南假山制作
  第六步:用镀锌丝网包裹钢框架。网格大小约为1cm。
  Step 6: Cover the steel frame with galvanized wire mesh. The mesh size is about 1 cm.
  第七步:在没有砂浆的水泥中加入适量的纸巾灰和纤维丝,用水拌匀,涂抹在丝网表面。这一层很难进入网格。加入纤维和纸巾灰,增强附着力和附着力。
  Step 7: Add proper amount of paper towel ash and fibre silk to cement without mortar, mix well with water and apply it on the surface of wire mesh. This layer is difficult to access the grid. Add fiber and tissue ash to enhance adhesion and adhesion.
  步骤8:第一层水泥基本干燥后,在表层轻轻涂抹1:1的水泥砂浆,使上层更加坚实牢固;
  Step 8: After the first layer of cement is basically dry, gently apply 1:1 cement mortar on the surface to make the upper layer more solid and firm.
  步骤9:待图层稍干后,可以绘制一层并做表面细节或纹理,如果用彩色水泥做这一层,以后也可以不做颜色线条;
  Step 9: When the layer is slightly dry, you can draw a layer and make surface details or textures. If you use color cement to make this layer, you can also make no color lines in the future.
  第10步:油漆外墙和丙烯颜料的颜色效果;
  Step 10: Color effect of paint exterior wall and acrylic paint;
  步骤11:拆除脚手架,清理战场并撤离。
  Step 11: Remove the scaffolding, clean up the battlefield and evacuate.
广东11选5软件下载 安徽11选5app下载 状元彩票注册 蚂蚁彩票 皇冠彩票开户 安徽11选5app下载 金凤凰彩票开户 甘肃11选5app 568彩票 湖南快乐十分软件下载